XXI SERIES - GENERAL INFORMATION |
All cabinet shells are 20-gauge steel and have a seamless back & top with reinforced
corners one lock & two keys are standard on all cabinets.
Keying combinations are random unless "To be keyed alike" is specified
when ordering. There is no extra cost for this option.
All Cabinets contain a patented interlocking safety system which allows only one
drawer to be opened at a time.
Each Cabinet choice must gave a specified COLOR
on the tab order. (See Color Guide)
|
|
Ex: CIL-30615-5D/LN |
|
All drawers have 12" high fronts and come with side-to-side folder bar accessories
which accommodate both legal & letter size material.
A Top Receding Door is standard on 5 drawer models only. (3) Plate dividers are
also provided that can be notched into the top drawer. |
|
Vertical cabinets are available in either 15" wide (Letter size) or 18" (Legal size).
The standard depth on all vertical cabinets is 27-5/8".
All drawers have an 11" high front and come with either a compressor follower (CF)
or folder bar (FB) accessories which must be specified on order. (See Accessories
page for further details.)
|
|
Media Storage Units(OEI SERIES XXI) |
You have the option of adding blank shelves to any storage unit to maximize storage
space.
|
|
Pedestals (OEI SERIES XXI) |
|
Pedestals are available in sizes and drawer combinations to suit any personal storage
requirement. Freestanding and mobile units are designed to fit below most work surfaces.
Hanging and work surfaces supporting units are sized to fit under System Furniture.
A mounting kit is provided with each unit to allow installation under other compatible
workstations. |
|
Body: |
|
Twenty-gauge steel body with 18 and 20 gauge steel top and box frame front and back
Uprights are notched in 3 intervals for drawer suspension mounting. |
|
Height: |
|
Work surface Supporting 27-3/4", Freestanding: 22-1/4", 25-3/16",Mobile: 24-5/8",
27-3/4", Hanging: 19-3/16", 22-5/8", 25-1/16". |
|
Depth: |
|
Products are available in three standard depths: 17-5/8", 21-5/8", and 27-5/8. |
|
Width: |
|
All products are 15" wide. |
|
Adjustable Glides: |
|
Freestanding and floor supporting pedestals include four glides,adjustable from
outside the cabinet. |
|
Counterbalances: |
|
Counterbalance weight included in all mobiles units and is recommended on freestanding
units. |
|
Caster Kit: |
|
Consists of four twin-wheel hooded casters. Front two casters are locking; rear
two casters are non-locking. Counterbalance weight included in all mobile units. |
|
Drawers: |
Fronts: Two-piece metal construction.
Twenty-two gauge steel outerskin welded to 22-gauge inner liner. With full width
inset pull. Drawer fronts overlap front of pedestal.
Three-inch (pencil) drawer: Single
wall two-piece construction. Body 22-gauge; back 22-gauge. Operates on two section
3/4 extension ball bearing suspension.
Six-inch (box) drawer: Single wall
two--piece construction. Body 22-gauge; back 22-gauge. Operates on two section 3/4
extension ball bearing suspension.
|
|
BOOKCASES (OEI SERIES XXI) |
Shells are unique to bookcases, featuring a flush inner liner. The liner is punched
to accept shelf brackets on 1" increments, starting Approximately 8" from the bottom
of the cabinet and terminating approximately 8" from the top of the cabinet. The
liners, top and bottom reinforcements are welded into a rigid box frame. The shell
is constructed from 18 and 20 gauge steel, with multiple strategically located offsets
to maximize strength. The back is seamless. All corners are reinforced.
Bookcases are supplied with four adjustable glides and are easily adjustable on
1" increments. The glides can be adjusted from inside the bookcase using a phillips
screwdriver. |